Specification MOUSE-E-MOTION Data Logger
Specification
General
Case | Plastic | ||||
Dimensions (W x H x D) | 65 x 25 x 112 mm | ||||
Weight | ~ 150 g without batteries ~ 350 g with batteries |
||||
Ambient Conditions |
|
||||
Operating Span (Battery Operation): (Akkubetrieb) |
Depends on sensor equipment/activation and battery type: | ||||
Battery type | Maximum operating span (All sensors active) |
||||
1600 mAh | 120 days | ||||
2000 mAh | 150 days | ||||
2400 mAh | 180 days | ||||
Clock Accuracy | ± 30 s/month (± 10 ppm) | ||||
Memory | Non-volatile EEPROM, 64KB | ||||
Memory Capacity | 32,760 records | ||||
Data Retention | 200 years without power | ||||
Record Interval | 1s to 9999s (= 2h 46min 39s) | ||||
Interval Granularity | Max. 9999 (Temperature and relative humidity values can only be measured with the record interval.) |
||||
Startup of Logging | Programmable up to 100 days in advance | ||||
Recording Span | Depends on the record interval: | ||||
Device Configuration & Data Download | PC software (Win 7, Win 10) | ||||
Interfaces | Serial (RS-232), 9,600/19,200/57,600/115,200 Baud (USB interface available through USB-to-serial adapter.) |
||||
Connectors | 3.5mm jack socket for PC interface cable 3.5mm jack socket for power supply Universal socket (MD6 female) for external sensors |
||||
Power Source | 2 batteries type Ni-MH 1.2V Mignon/AA/R6 1600…2400mAh | ||||
Charging current 1A Charging time 3.5h NOT FOR USE WITH ALKALINE BATTERIES ! |
Activity Measuring
Sensor | Passive ultra-compact infrared sensor (NAiS MP motion sensor ‘NaPiOn’) |
Detection Range | Depending on distance: The covered range results from lines drawn from the detection zone of the motion sensor with an angle of at least 19° in the longitudinal direction and 11° in the cross direction. The base area has a rectangular shape. |
Detection Distance | up to 5m |
Measuring Range | 0 to 9999 motion detections per record interval |
Resolution | 1 motion detection per second |
More information and detailed specifications on the NAiS website |
Temperature Measuring
Sensor | Multi-sensor module with calibrated digital output (Sensirion SHT15) |
Measuring Range | -40 to 60°C |
Resolution | 14Bit or 0.01°C |
Accuracy | < ±0.4°C at 5 to 40°C < ±1°C below 5°C / above 40°C |
More information and detailed specifications on the Sensirion website |
Measuring of Relative Humidity
Sensor | Multi-sensor module with calibrated digital output (Sensirion SHT15) |
Measuring Range | 0 to 100% relative humidity (RH) |
Resolution | 12Bit or 0.03% RH |
Accuracy | < ±2% at 10 to 90% RH < ±4% at 0 to 10% and 90 to 100% RH Non-linearity (10 to 90% RH) < ± 3 % RH |
More information and detailed specifications on the Sensirion website |
Light Intensity Measuring
Sensor | Light-to-voltage optical sensor with photodiode/amplifier chip (Microsemi LX1971). Responds only to light of the visible range (spectral response emulating the human eye, no interference with infrared wavelengths.) |
Measuring Principle | Proportional conversion of light intensity to output voltage (light-to-voltage principle). |
Measuring Range | 0 to 20,000Lux |
Resolution | 1Lux at 0 to 200Lux 10Lux at 200 to 2,000Lux 100Lux at 2,000 to 20,000Lux |
Accuracy | < ± 3 Lux Non-linearity: < ± 2 Lux Zero error (offset): < ± 1 Lux |
More information and detailed specifications on the Microsemi website |
Measuring of Analog Input
Analog-to-Digital Converter | On-chip (Atmel ATmega8) 2.5V reference voltage |
Signal Input | 0…2,5 V |
Impedance | 1 MOhm |
Resolution | 10 Bit or 2,44 mV |
Accuracy | < ± 3 Bit Non-linearity: < ± 1 Bit Zero error (offset): < ± 2,5 Bit |
More information and detailed specifications on the Atmel website |